“PERMANENT POSITION”: TEREX CTT 91-5 TS12 CROWNS WUPPERTAL GAS HOLDER -- TOWER CRANE TO REMAIN INSIDE REPURPOSED GAS HOLDER AFTER CONSTRUCTION WORK IS COMPLETED

2018.02.12 - admin

ZWEIBRÜCKEN - January 30, 2018 - To put the old gas holder in Wuppertal to new use, the owners of the building and general managers of Gaskessel Wuppertal GmbH & Co. KG, Thomas Drescher, Marcello Groß, and Daniel Mai, decided ...

... to erect a four-story building inside it – at a distance of three meters from the outer shell. That was way too little space for setting up the indispensable construction crane, which is why a Terex CTT 91 TS12 tower crane was transplanted straight into the building instead. And it will be staying there too.

Wuppi_8

The Wuppertal gas holder is not just a formidable relic of the city’s industrial past, but also a skyline defining landmark that is absolutely worth preserving. However, repurposing a gas holder of this type is a difficult task. After all, nothing can be mounted on the outer shell, which is made of lightweight metal as it was designed for the sole purpose of withstanding gas pressure. This did not scare off the project initiators Thomas Drescher, Marcello Groß, and Daniel Mai, however. Instead, they developed a concept that is unique in Europe: They decided to put up a four-story building with 4,000 square meters of event, fitness, bar, and restaurant space inside the 67-meter-tall gas holder.

Wuppi_1

To bring this extraordinary project idea to life, the construction of the new building inside the gas holder required an unorthodox approach. Since the new building was to be erected at a distance of three meters from the gas holder’s outer shell, the space available for crane work would be extremely limited. For this reason the first phase of construction consisted of erecting a staircase tower with an elevator shaft right at the center of the new building so that the rest of it could be put together from there. The solution: The staircase, together with the elevator shaft, would function as a crane tower on which a jib would be mounted. That was the plan, at least. But in order to be able to reach all the working areas inside the gas holder by crane, it was first necessary to design and build a suitable tower crane that would fit the building. “A ready-made crane would not have allowed us to put our idea into practice. That’s why we contacted Terex Cranes and asked them to manufacture a suitable crane for us with a special length and setup configuration,” Daniel Mai reports.

Wuppi_2

The Terex engineering staff decided to tackle the request by making a special-purpose crane based on a CTT 91 TS12 tower crane. “As far as we were concerned, the two decisive reasons to use the CTT 91 TS12 as a basis were the low individual weights of its components and its appealing look, which matches the architecture. Also, upon request from the customer, we painted the model custom black and gray,” explains Sales Manager Jörg Körtgen, who oversaw the project on-site together with Terex Head Assembly Technician Mirco Manarin. And since the quotation provided by Terex was also attractive in terms of price, the deal was sealed quickly.

Precision work

For the tower crane to be installed on the staircase, an entrance gate first had to be cut into the shell of the building. To preserve the original structure of the landmark as far as possible, the gate had to be just big enough for a mobile crane to drive into the gas holder so that it could assist with the setup of the Terex CTT 91 TS12 tower crane. Due to the space constraints, the only additional equipment to help with assembly was a forklift truck. “Since the CTT 91 TS12 is designed for ease of assembly, we managed perfectly, though,” Mirco Manarin reports. It did take the three-person team just one day to install the crane head on the 25.8-meter-tall staircase tower.

Wuppi_3

The job required high precision, as the crane head had to be placed on the roof of the staircase tower and welded there in a perfectly centered position – after all, there were literally only 15 centimeters of space available between the planned end of the custom-length 18.45-meter jib and the gas holder’s sensitive outer shell. However, meticulous planning ensured that this challenge was overcome without any problems. “We could rely completely on the support provided by Terex with Mr. Körtgen as our contact. The manufacturer took Wuppertal-based GKM Architektur Studio’s plan for the unorthodox solution and optimized it further based on the submitted static calculation for the mounting, then provided unparalleled support all the way to assembly,” Daniel Mai praises the company’s smooth collaboration with Terex.

Wuppi_4

Wuppi_5

Wuppi_6

Wuppi_7

Art in architecture

The result is impressive and meets all expectations: The permanently installed CTT 91 TS12 covers any and all working areas within the gas holder and can lift loads of up to five tonnes. Thus everything is set for the construction work to be completed by the end of 2018 as scheduled. This just leaves the question of why the crane will continue to remain on the building once construction work is completed. The answer is simple: “We’ll be using it to set up things in the event and exhibition areas, as well as for maintenance work,” Daniel Mai explains.

Contact for North America:                                                                                  Contact for rest of the world:

Dustin Hamburg                                                                                                   Damien Bizjak

Marketing Communication                                                                                     Marketing Communication

Tel. +1 405 491 2269                                                                                           Tel. +49 6332 83 1023

E-mail: Dustin.Hamburg@terex.com                                                                      E-mail: Damien.Bizjak@terex.com

ZWEIBRÜCKEN – January 25, 2018 – CraneWorks, Inc., one of the United States’ leading suppliers of lifting equipment, placed an order for eight various sized Demag® cranes, including three AC 45 City models, two AC 220-5 ...

Category: Hersteller-News , added on 2018.02.12

Ehingen / Donau (Germany) 17 January 2018 – Liebherr has received a major order from Al Faris Equipment Rentals: the company based in Dubai, UAE has ordered 25 new Liebherr mobile cranes to mark its 25th anniversary. ...

Category: Hersteller-News , added on 2018.01.22

ZWEIBRÜCKEN, January 18, 2018 – One of Italy’s largest crane service providers, Vernazza Autogru has recently placed an order for two Terex® RT 90 rough terrain cranes. Vernazza Autogru’s new Terex RT 90 cranes have ...

Category: Hersteller-News , added on 2018.01.19

ZWEIBRÜCKEN, January 12, 2018 – After signing a historic order with the Mediaco Group in spring, Terex Cranes began the first deliveries. The first of these machines, a Demag AC 220-5 was ...

Category: Hersteller-News , added on 2018.01.12

Ehingen / Donau (Germany) January 2018 – Danish crane and heavy haulage contractor BMS took delivery of the very first LTM 1090-4.2 in mid-December 2017. Liebherr first unveiled the 90-tonne crane in March of the same year at the Conexpo in Las Vegas. ...

Category: Hersteller-News , added on 2018.01.12

Paris (France), December 20th 2017 –Liebherr will exhibit a number of new products at stand E6/E035 on the open-air grounds at Intermat 2018’s Villepinte exhibition centre in northern Paris. ....

Category: Hersteller-News , added on 2018.01.09

ZWEIBRÜCKEN - December 19, 2017 – Since December 2017, a Demag® AC 160-5 all terrain crane has been added to the fleet of crane specialist Mayer Autokran-Vermietung from Burgberg in the German Allgäu region. The crane was handed over by Terex Senior Sales

Category: Hersteller-News , added on 2018.01.09

ZWEIBRÜCKEN – December 14, 2017 – Mammoet’s purpose is to help its clients improve construction efficiency and optimize the uptime of their plants and installations, which is why the company has placed an order for ...

Category: Hersteller-News , added on 2018.01.09

Amersfoort (Netherlands), 18 December 2017 – Liebherr has supplied the 250th MK 88 to Barneveldse Kraanverhuur (BKV). The Dutch crane contractor is a long-term customer of the construction machine manufacturer ...

Category: Hersteller-News , added on 2018.01.04

ZWEIBRÜCKEN – January 2, 2018 – Kanagawa, Japan crane specialist, Aoki Juki Co. LTD is expanding its operations with the addition of a new Demag® AC 700-9 all terrain crane. ...

Category: Hersteller-News , added on 2018.01.04

Bangkok (Thailand), 14 December 2017 – Thai Obayashi is using two Liebherr 160 HC-L cranes and a Liebherr 125 HC-L to construct the Samyan Mitrtown project, near the soon to be opened MRT subway extension. ...

Category: Hersteller-News , added on 2018.01.04

Ehingen / Donau (Germany) December 2017 – It made a nice change for Swiss construction contractor Hartmann and its Liebherr LTM 1060-3.1 mobile crane. At the end of November, the 60-tonne crane erected ...

Category: Hersteller-News , added on 2018.01.04

Ehingen / Donau (Deutschland) December 2017 – Wasel GmbH Schwerlastlogistik accepted two rough-terrain cranes of the new LRT series from the Liebherr plant in Ehingen at the end of November. With the LRT 1090-2.1 and the LRT 1100-2.1, ...

Category: Hersteller-News , added on 2018.01.04

Munich (Germany), 07 December 2017 – Hoisting bridge elements through two overhead cables was the most difficult part of the job. A Liebherr MK 88 Plus mobile construction crane dismantled a cable bridge at night. ...

Category: Hersteller-News , added on 2018.01.04
Anmelden

Register

For each customer the right package.

Register now and increase your turn-over.